Pro-care Bariatric

High Specification Pressure Relieving Bariatric Mattress

The Pro-care Bariatric has a range of unique features for both patients and caregivers, and has been designed to comply with the most stringent infection control guidelines. It is suitable for all types of Bariatric patient from pressure ulcer prevention right the way through to managing the most severe pressure ulcers.

The Pro-care Bariatric is one of the only mattresses on the market that has a designated heel zone allowing the caregiver to float the heel, meaning they can comply with EPUAP guidelines on pressure ulcer management in the heel area.

The Pro-care Bariatric is available in two widths 107 cm and 122 cm

CPR

The CPR dials are located at the head end of the mattress and are designed to be highly visible in an emergency. The unique dial design reduces the risk of accidental activation.

Transport Mode

Transport Mode is designed to be simple and easy to use. Its simple click-in design also means it is robust and easy to keep clean.

Antimicrobial Filter

The antimicrobial filter is designed to ensure the air going into the system is as clean as possible, helping to protect the pump from break down and to ensure air stored in the mattress is as clean as possible.

Cell-in-Cell QubiCell™

The air cells modular design means maintenance, replacement and decontamination are easy to carry out. Cell-in-Cell QubiCell™ technology also means that the patient is safely supported throughout the length of the mattress, and the unique rectangular cell design means the patient benefits from higher levels of pressure relief, comfort and weight redistribution. The Cell-in-Cell design can help provide better support to the patient in the case of power failure.

Features & Benefits

Designated Heel Zone: Allows the caregiver to isolate individual air cells in the heel area for 100% pressure offloading, allowing the caregiver to float the heel and comply with EPUAP guidelines relating to pressure ulcer management.

Weight Setting Function: The intuitive and easy to use weight setting function allows the end user to set the mattress up to an individual patients weight, meaning the internal cell air pressures will be correctly set for each use.

Alternating Therapeutic Mode:  Continuously and sequentially inflates and deflates the air cells to allow for pressure redistribution over a 10.15,20 or 25 minute cycle time.

Static Mode: Addresses areas of high contact pressure by redistributing the body mass over a greater surface area through a process of immersion. The mattress will not stay in the static mode but will revert back to the therapeutic mode after 20 minutes.

Seat Inflate Mode: When a patient is in the upright position, the seat inflate mode increases the pressure throughout the mattress in order to better support the sacral area.

Low Pressure Alarm: Alerts the caregiver if there is a loss of air pressure in the mattress.

Max Firm Mode: Hyper-inflates the cells, providing a firm surface for moving, handling and nursing procedures. For the safety of the patient the mattress will only stay in Max Firm Mode for 20 minutes and will then revert back to Alternating Therapeutic Mode.

Power Failure Alarm: Notifies the caregiver when there is a loss of power if the mattress is unplugged.

Service Fault Indicator: Alerts the caregiver when the mattress needs to be repaired.

Lock Out: Automatically locks the control panel to help prevent the changing of settings inappropriately.

Rectangular Sacral Cell-in-Cell Design: Unique cell design offers the patient more support and comfort in the Sacral area throughout the therapeutic pressure relieving cycle.

Mattress Cover: The cover is flame resistant to BS 7175 Crib 7 and has a host of features to aid with infection prevention  including a 360 degree zip, white underside, vapour permeability, antimicrobial properties and is water resistant. The cover is four way stretch to offer greater pressure relief and comfort levels to the patient. It is also possible to launder the cover in a washing machine.

TECHNICAL SPECIFICATIONS

Mattress Specification

Mattress Dimensions : 200 x 107 x 25.4 cm or 200 x 122 x 25.4 cm

Mattress Weight : 11.6 KG

CPR : Robust CPR Valves

Cell Structure : Cell-in-Cell QubiCell™

Designated Heel Zone : Allows for complete offloading/floating of heels

Max Firm : To assist with patient care

Seat Inflation Mode : Helps support the patient in the upright position

Cable Management : To allow for safe storage of the power cable

Modular Cell Construction : For ease of maintenance

Anchoring Straps : For safe attachment to bed frame

Static Head Zone

Static Mode

Non-Slip Base

Cover Specification

Flame Resistant Crib 7

360 Degree Zip

White Underside of Cover

Four Way Stretch

Vapour Permeable

Water Resistant

Machine Washable

Antimicrobial

Pump Specification

Maximum Patient Weight : 450 KG

Minimum Patient Weight : 40 KG

Pump Size : 29.1 x 20 x 11.7 cm

Pump Weight : 2.2 KG

Cycle Time : 10, 15, 20 and 25 Minutes

Weight Setting : Manual patient weight adjustment 40 KG – 450 KG

Voltage :  AC220-240V, 50Hz; AC  120V/60Hz

ABS Cover :  ABS Flame Retardant Pump Cover

Transport Mode

Hanging Brackets

Audible and Visual System Fault Alarms

Antimicrobial  Air Filter

Extra Long Power Cable

Mute Button

Easy to Identify Power Light

Pump Lockout

Fault Indicator