Domus 4

Pressure Relieving Mattress

The Domus 4 is a highly versatile and cost effective solution to pressure area care. Its modular construction makes it easy to keep clean and maintain, and it offers a number of features normally only found on much higher specification mattresses.

CPR

The CPR toggles are located at the head end of the mattress and are designed to be highly visible and easy to use in an emergency.

Transport Mode

 Transport Mode is designed to be simple and easy to use. Its simple click in design also means it is robust and easy to keep clean.

Air Cells

The air cells modular design means maintenance, replacement and decontamination are easy to carry out. Cell on Cell Technology also means that the patient is safely supported throughout the length of the mattress.

Head Up Control Panel

The control panel on the Domus 4 is specifically designed to be ergonomic and easy to see without the need for the caregiver to change position when using it.

Features & Benefits

Alternating Therapeutic Mode: Continuously and sequentially inflates and deflates the air cells to allow for pressure redistribution over a ten minute cycle time.

Cell on Cell Design: The cell on cell design offers the patient higher levels of support and comfort throughout the therapeutic pressure relieving cycle.

Seat Inflate Mode: When a patient is in the upright position, the seat inflate mode increases the pressure throughout the mattress in order to better support the sacral area.

Max Firm Mode: Hyper inflates the cells providing a firm surface for moving, handling and nursing procedures. For the safety of the patient the mattress will only stay in Max Firm Mode for 20 minutes and will then revert back to Alternating Therapeutic Mode.

Low Pressure Alarm: Alerts the caregiver if there is a loss of air pressure in the mattress. 

Power Failure Alarm: Notifies the caregiver when there is a loss of power if the mattress is unplugged.

Service Fault Indicator: Alerts the caregiver when the mattress needs to be repaired.

Lock Out: Automatically locks the control panel to help prevent the changing of settings inappropriately.

Static Mode: Addresses areas of high contact pressure by redistributing the body mass over a greater surface area through a process of immersion, which is achieved by reducing the mattress pressure by up to one third across the whole surface area of the mattress.

Mattress Cover: The cover is flame resistant to BS 7175 Crib 7 and has a host of features to aid with infection prevention  including a 360 degree zip, white underside, vapour permeability, antimicrobial properties and is water resistant. The cover is four way stretch to offer greater pressure relief and comfort levels to the patient, it is also possible to launder the cover in a washing machine.

TECHNICAL SPECIFICATIONS

Mattress Specification

Mattress Dimensions : 200x85x20.3cm or 200x90x20.3cm

Mattress Weight : 7.5 KG

CPR : Highly Visible CPR Toggles

Weight Settings : Six digital weight setting to help set the mattress up quickly and accurately

Cell Structure : Cell on Cell Technology

Max Firm : To assist with patient care

Seat Inflation Mode : Helps support the patient in the upright position

Cable Management : To allow for safe storage of the power cable

Modular Cell Construction : For ease of maintenance

Anchoring Straps : For safe attachment to bed frame

Static Head Zone

Static Mode

Non-Slip Base

Cover Specification

Flame Resistant BS 7175 Crib 7

360 Degree Zip

White Underside of Cover

Four Way Stretch

Vapour Permeable

Water Resistant

Machine Washable

Antimicrobial

Pump Specification

Maximum Patient Weight : 200 KG

Pump Size : 29×18.5×12.6 cm

Pump Weight : 2.2 Kg

Cycle Time : 10 minutes

Voltage :  AC220-240V, 50Hz; AC :  120V/60Hz

ABS Cover :  ABS Flame Retardant Pump Cover

Transport Mode

Hanging Brackets

Audible and Visual System Fault Alarms

Mute Button

Easy to Identify Power Light

Pump Lockout

Fault Indicator

Extra Long Power Cable